Representative results only · all C code here is synthetic · no TI code is included or displayed details
Results are representative and informational only. Under Texas Instruments' C2000 software license terms, real TI SDK source code is confidential and licensed for internal use only, so no TI code is included, displayed, processed, or emitted here. All C code on this site is synthetic, written for this demo, with invented names and values that resemble typical power-converter firmware. The generated headers compile against this demo's sample firmware in CI; the "legacy" files used for the audit are illustrative and not guaranteed to compile on any target. Product ratings come from public IntelliPower data sheets; all circuit values and gains are invented. Independent demo, not affiliated with or endorsed by AMETEK, IntelliPower, or Texas Instruments. TI, C2000, and Code Composer Studio are trademarks of Texas Instruments.
Review reports
One report per variant: the document an engineer signs. Click a constant to see its derivation, sources, and generated C code. Print for a sign-off copy.
| Variant | Product | Board | Target | Result | Scenario |
|---|---|---|---|---|---|
| fa10507 | FA10507 | rev A | F28004x | all gates pass | FA10507 (1500 VA) on control board rev A, F28004x-class target |
| fa10449 | FA10449 | rev A | F28004x | all gates pass | FA10449 (650 VA) on control board rev A, F28004x-class target |
| fa10434 | FA10434 | rev A | F28004x | all gates pass | FA10434 (800 VA) on control board rev A, F28004x-class target |
| fa10507_f2803x | FA10507 | rev A | F2803x | all gates pass | FA10507 (1500 VA) on control board rev A, legacy F2803x-class target (IQ20) |
| fa10507_revB | FA10507 | rev B | F28004x | 3 failure(s), nothing written | FA10507 (1500 VA) on control board rev B (alternate current-sense amplifier) |
Board rev B shows the alternate-component story: the replacement current-sense amplifier has twice the gain, so the 1500 VA unit's hardware peak-current limit no longer fits the sensor's range. The tool refuses to generate and says why. The same board is fine for the 650 VA unit.